Use a 1" tank for the Boge Cartos !!
The M1A1 tank from Notcigs is made from an UNBreakable tube material that only Notcigs has , it has a locking side screw for positive holding to the cartomizer , it has Aluminum ANODIZED ( impervious to corrosion ) top and bottom caps , both internal and external orings on BOTH the bottom and top caps .
If you can break it we will replace the tube section no charge ! We also have a spares / rebuild kit that includes 1. screw 1. internal o-ring 1. external o-ring and a Syringe for refilling the M1A1 tank for $5.95
A TANK uses a Cartomizer as the center section , the cartomizer will need a hole drilled or punched in it to allow juice to flow from the tank into the cartomizer , many punch thier own cartos about 3/8" from the top of the threads . Use the SIDE filler port to refill your tank , this screw also acts as a LOCK to hold the tank in place.
1" tanks are for regular size carts like a Boge 35mm or 1.4" long , the 1.5" tanks os for XL types 50mm or 2" long , the 1.5 " is approx. 5 ml juice storage the 1" is approx 3ml juice storage.
Based on the Vermonster / CHaos / yzrmbsg design from VF
thanks guys !!
Tanks Cannot be returned for a refund , this woud be a USED item that cannot be refurbished. sorry
Posted by Shaazaam on 16th Sep 2013
The very best top and bottom there is in a tank of this type. Hard top that you can hold in place while you replace your carto, some others have a soft top like large rubber boot with a smaller o-ring to seal the tank making for a poor system.
Posted by Markfm on 22nd Jul 2013
I've used the M1A1 since it first came out. 6 ml/day for 22 months, over 3.5 liters of eliquid through it, in all that time I've replaced a total of 1 o-ring. A leak free, easy to fill, excellent product.
The tank took a beating, countless drops on hard surfaces, never a doubt it would be absolutely fine.
After 22 months it was finally time for a new one, as the original M1A1 went to visit Davy Jones' Locker, lost in a quite muddy lake.
Fortunately it was on a lesser PV, not my Buzz Pro workhorse.
I ordered a replacement, of course, received quickly due to the usual Notcigs lightning fast shipping :)
Posted by Charlotte on 10th Jul 2013
Perfect for my Buzz Pro and many of my other PVs. Really impressed with the screw to hold my Cartos in place...great idea. No worries :)
Posted by Rob on 24th Apr 2013
It looks good it works good no leaks what more can you ask for! The only reason I didnt give it five stars is cause I got my with little hairlin cracks around the fill hole where the plug screws in.Doesnt leak just a cosmetic flaw.
Posted by Smackdye on 5th Apr 2013
Mine seems to be a bit off, as in the end caps don't quite sit perfect and the screw seems a bit long because it pushes my carto over to much... But a really nice tank money the less
I would like to see a tiny bit thicker o rings in the center of the caps but other than that, super pleased with the tank
Posted by scott thonen on 28th Mar 2013
Posted by Delilah718 on 21st Feb 2013
I ordered this tank and received it a record-breaking three days later! Thank you so much!
I love this tank! What I love the most about it is the size! It fits my Buzz Pro(s) perfectly of course, but it's also a perfect fit on my other PVs. This tank doesn't exceed the circumference of my BP or other tube PVs. It looks sleek and fitted and I love it! I hope notcigs will offer stainless steel caps for this wonderful little tank in the future!
Posted by nepatitan on ecf/ecr on 30th Jan 2013
Got this tank a few days ago for my blue buzz pro. I got back into cartos a few weeks ago and wanted something that matched. The carto is so easy to put into the tank and like that the screw locks the caro in. The tank is really clear as well, much clearer than other plastic tanks I have.
Posted by Exodus454 on 4th Jan 2012
Just received my tank with my buzz yesterday.. saw there wasn't a review so I decided to change that. This is my first tank ever.
The tank is incredibly well made. Everything fits together very snugly and is o-ringed inside and out. Not even a hint of a leak so far!
I'll also say I was very skeptical of the thumb screw, but using it as a filling port with a syringe is a godsend. It literally takes about 5 seconds to fill it, no mess whatsoever. Juice capacity on the 1" version is about 3mL. The thumb screw also works excellently to keep the carto from slipping around, you really don't have to crank it down hard either to keep it from slipping. The thumb screw looks a lot bigger in the pictures, it's still easily pocketable.
The o-rings need to be lubed liberally with juice the first time you slide a carto in though, otherwise it tries to pull the o-rings through. That's almost to be expected though.
I will say, for anyone like myself who hasn't tried a tank - buy this tank! It really completes the buzzpro well and every drag you take tastes like a freshly topped off carto. I got mine in rootbeer to match my buzz and it really looks awesome. The $10 off when you buy it with a buzz is a steal too - I'm probably going to buy another one or two at full price, it's that good!
Thanks for a great product guys!