Loading... Please wait...

Buzz Pro II ECF APPROVED VERSION

Price:
$119.00
Weight:
1.00 LBS
Shipping:
Calculated at checkout
 
 
Quantity:


Product Description

Order MATCHING tanks in the TANK section 

Patent Pending

Buzz Pro II Varivolt E-cig 

ECF Approved Specs:

  1. 15 watts maximum power output
  2. Wheel adjustable voltage dial ( like the Infinity ) 
  3. Improved battery life 2 x 's avg. , we have a new controller that is MUCH more efficeint. avg. 15 hrs per charge 
  4. New finish ,  blasted finish with no knurling , it will improve the slip factor ! 
  5. Uses same batteries as the original Buzz (16340 type) , and charger so no need to buy new batts etc. , also the top cap will be the same so you can use spares you have from the Original Variable Voltage Buzz.
  6. 3-3 to 5.5 volt adjustment 
  7. New top cap design for a sleeker look.
  8. Over current Protection 
  9. Over temp. protection
  10. Reverse Battery protection 
Dimentions : 4.25" long x 0.86" diameter 
Weight = 3.5 oz. with batteries in it 
These products contain rechargeable lithium batteries. They can be a fire hazard when mistreated. Use of a LiPo charging bag (available here) is highly recommended. 

The following guidelines should be strictly followed:

1. Only recharge these devices with the intended charging cable or adapter. Using chargers with incorrect voltage or current can cause a fire or catastrophic failure.

2. Never leave a charging battery unattended. 

3. Never charge a battery overnight while you sleep.

4. Never leave a battery on your charger longer than necessary. When it is full, unplug your charger and remove the battery. Leaving a battery on charge when it is full will degrade it’s performance and may result in a fire.

Other Details

Matching Tanks :
http://www.notcigs.com/tanks/

Find Similar Products by Tag

Buzz Pro  

Find Similar Products by Category

Write your own product review

Product Reviews

  1. If it was not a decent mod I would not have ordered my wife one a year later

    Posted by Tracy S on 13th Mar 2013

    I ordered my buzz pro II on 03/2012 the only problem I had was if I tightened the tank on the 510 to tight it would short out and just show the red led. The screw at the bottom of the buzz has to much of a round top and it shorts out. It took it apart and diamond file to flatten it and it works perfect. Now just need to do the wife’s mod that I got on 03/2013
    they are great mods with a little fine tuning, and well worth the money.


  2. Love It !!!

    Posted by Earle D. on 5th Feb 2013

    Having owned a generation-II Buzz-Pro, I was a bit sceptical of the larger cutouts on the tube. But I have to say the new ECRF-II is as good looking as it is functional. I bought this as a backup/replacement for my Gen-II (just in case - there's nothing wrong with the original) becuase I can't imagine being without one - even for a couple of days. No analogs since 9/15/2011 thanks to notcigs.com.




Our Newsletter